Jost

Modul CS

Modul CS

Item Description Remark Order No. per set
1 Cover   JS E0046300 1
2 Bevel gear with bolt   JS E0058600 1
3 Cover compl. with bearing compl. JS E0083900 1
3 Cover with bearing compl. from series 0072322 JS E0083901 1
4 Grease nipple with protective cap   JS E0084000 1
5 Shaft with bearing   JS E0084100 1
6 Grease tank   JS E0002000 1
7 Gear   JS E0055800 1
8 Crank shaft compl. compl. JS E0046500 1
9 Bearing holder compl. compl. JS E0058800 1
10 Crank shaft and bearing holder compl. compl. with 08 + 09 JS E0056600 1
11 Drive compl. compl. with 05, 07 + 10 JS E0084300 1
12 Bolts with washers and nuts   JS E0043100 1
13 Crank 350 mm w. parking hook with 12, 14 + 15 JS U01 1
13 Crank 415 mm w. parking hook with 12, 14 + 15 JS U02 1
13 Crank 450 mm w. parking hook with 12, 14 + 15 JS U03 1
13 Crank 480 mm w. parking hook with 12, 14 + 15 JS U04 1
13 Crank 520 mm w. parking hook with 12, 14 + 15 JS U05 1
13 Crank 570 mm w. parking hook with 12, 14 + 15 JS U07 1
13 Crank 620 mm w. parking hook with 12, 14 + 15 JS U08 1
14 Crank bushing   JS E0042700 1
15 Crank parking hook for crank 350mm (JS U01) JS E0040200 1
15 Crank parking hook for crank 415-480mm (JS U02 - JS U04) JS E0040201 1
15 Crank parking hook for crank 520-620mm (JS U05 - JS U08) JS E0040202 1
16 Mh-04/750 shaft right   JS E0068303 1
16 Mh-05/700 shaft right   JS E0068302 1
16 Mh-06/650 shaft right   JS E0068301 1
16 Mh-08/600 shaft right   JS E0068304 1
16 Mh-09/550 shaft right   JS E0068305 1
17 Axial bearing   JS E0066400 1
18 Mh-05/700 inner tube r. + spindle and bearing with 17 + 03 (JS E0083901) JS E0067002 1
18 Mh-04/750 inner tube r. + spindle and bearing with 17 + 03 (JS E0083901) JS E0067003 1
18 Mh-08/600 inner tube r. + spindle and bearing with 17 + 03 (JS E0083901) JS E0067004 1
18 Mh-09/550 inner tube r. + spindle and bearing with 17 + 03 (JS E0083901) JS E0067005 1
19 Angle   JS E010.001 1

 

 
 

Modul CS

Modul CS

Advantages at a glance

• Stabilising leg

• For liquid and bulk tippers (rear)

• Support while unloading

• Levelling

• Integrated lubricant cartridge – no need to lubricate the spindle

• High degree of installation variability thanks to double bolt hole pattern

• Additional spindle nut
- Additional protection against wear and tear
- Minimal risk of accidents

• Compact seal between rear bearing cover and back plate

Technical Features

• Fully sealed gearbox

• Full length back plate

• Reinforcement

• HD bearing

• Reinforced inner tube

• Reinforced rigid foot

Technical Specification

 

 

* Bracing lugs are supplied loose

 

Note: 

Dimensions A, B and C, see general information.

Selection table / Versions available

Order No. M (mm) H (mm) D E (mm) Back plate Foot
CS 1044700R 750 470 12 728 full length T rigid
CS 1054700R 700 380 11 678 full length T rigid
CS 1064700R 650 380 10 628 full length T rigid
CS 1084700R 600 330 9 578 full length T rigid
CS 1094700R 550 280 8 528 full length T rigid

Technical Data (per piece / set)

Characteristic Value
Lifting capacity 12 t/ 24 t
Static load 33 t / 66 t
Lift per turn of handle  
- Low gear 0,9 mm
- High gear 15,0 mm
Crank force at 8 t lifting capacity 110 N

 

Remarks

Please order crank handle separately, see general information.

Two stabilizer legs are required per trailer.

There is no cross shaft.

Modul CS

Modul CS

PDF-Downloads

 
Mounting and Operating Instructions
Modul Landing gear 06/2010        
Modul CS 06/2010        
Flyer
MODUL Gear settings 05/2001            
MODUL C Special applications 09/2006        
MODUL CS Stabilizer leg 05/2006    
   
                   
 


CONTACT

Gümaş Otomotiv Sanayi ve Ticaret A.Ş.
Taksim Cad. No:33/A 34437,
Taksim - İstanbul

t: 0212 254 78 05
f: 0212 256 17 86 e-mail: info@gumas.com.tr