For every situation where the floorcovering is laid down along a different material (ex: PVC / Composite), at a junction, it is strongly recommended to:

- Apply a floor-wall joint between the floor and vertical walls ;

- Cover the floorcovering with a screwed down profile, by 2cm minimum.








1st Step:

Put the sealant into the angle before laying the floorcovering and press it firmly. When using mastic sealant, ensure an extra covering of 5mm on both sides in accordance with the manufacturer’s recommendations, after applying an activating agent and a primer. Cover the sides with a masking tape, which is then removed after application.








 2nd Step:

Cover the floorcovering + mastic sealant with a screwed down profile, in “L”. 





Gümaş Otomotiv Sanayi ve Ticaret A.Ş.
Taksim Cad. No:33/A 34437,
Taksim - İstanbul

t: 0212 254 78 05
f: 0212 256 17 86 e-mail: